Rabewa da Lamba na IDC Tricone Bits

Farashin IDCtricone rawar soja rarrabuwa da tsarin ƙididdigewa yana da mahimmanci don ganowa da fahimtar fasalulluka na nau'ikan nau'ikan raƙuman ruwa da ake amfani da su a cikihakar mai, gas, da rijiyar ruwa. Tsarin yana aiki kamar haka:

IDC ta ƙayyade cewa kowane nau'inuku tricone bitan rarraba shi kuma an ƙidaya shi ta hanyar amfani da lambar lambobi huɗu, wanda ke nuna ƙirar bit da aikace-aikacen sa a cikin tsari daban-daban. Ma'anar kowane lambobi kamar haka:

Lambobin Farko: Lambobin Lissafi

Wannan lambobi, wakilta ta lambobi 1-8, suna nuna halayen haƙori da samuwar abin da bit ya dace. Akwai manyan nau'ikan hakora guda biyu da ake amfani dasurijiyoyin mai: niƙa hakora da saka hakora (yawanci ana kiranta daFarashin TCI koTungsten Carbide Insert (TCI) tricone bits).

1. Milled hakora: Dace da taushi formations tare da ƙananan matsawa ƙarfi da high drillability. Wannan shi ne na hali donniƙan hakori tricone bits.
2. Niƙaƙen haƙoran: Ya dace da matsakaici zuwa matsakaici-tsayi mai ƙarfi tare da ƙarfin matsawa.
3. Niƙaƙƙen haƙoran: Ya dace da tsayayyen tsari tare da matsakaita zuwa babban ƙura.
4. Saka haƙora: Ya dace da sassauƙa masu laushi tare da ƙaramin ƙarfi da ƙarfi mai ƙarfi.
5. Saka hakora: Mafi dacewa don sassauƙa masu laushi zuwa matsakaici-wuya tare da ƙananan ƙarfin matsawa.
6. Saka hakora: An ƙirƙira don ƙirar matsakaici-wuya tare da ƙarfin matsawa, galibi ana amfani dashi a cikiTCI tricone bits.
7. Saka hakora: Cikakke don gyare-gyare masu wuya tare da matsananciyar abrasiveness ko halayen abrasive.
8. Saka haƙora: Ya dace da ƙaƙƙarfan ƙira mai ƙarfi tare da ƙazanta mai girma, galibi ana amfani dashi a cikiTungsten carbide tricone drills.

Lambobin Na Biyu: Lambar Daraja ta Lithology

Wanda ke wakilta da lambobi 1-4, wannan lambobi yana ƙara rarraba gyare-gyare a cikin rarrabuwar lambobi na farko daga taushi zuwa wuya, yana nuna takamaiman buƙatun hakowatricone rock bit.

Lambobi na uku: Lambobin fasalin Tsarin Bit

Wannan lambobi, wanda lambobi 1-9 ke wakilta, suna nuna ma'aunin ma'auni da ma'aunin kariya. Ana amfani da lambobi 1-7 don bayyana tsarin da aka fi dacewa da tsarin aiki da kariya a cikin bututun mai, gas, da rijiyoyin ruwa, yayin da 8 da 9 an kebe su don sabbin abubuwa na gaba.

1. Abubuwan nadi da ba a rufe ba
2. Nadi mai sanyaya iska
3. Nadi bearings tare da ma'auni kariya
4. Abubuwan nadi da aka rufe
5. Abubuwan nadi da aka rufe tare da kariyar ma'auni
6. Rufe kwanon zamiya
7. Rufe kwandon zamiya tare da kariyar ma'auni

Lambobin Hudu: Ƙarin Ƙididdiga na Tsarin Tsarin

Ana amfani da wannan lambar harafi don wakiltar ƙarin fasali waɗanda ba za a iya bayyana su da lambobi uku na farko ba. IDC ta ayyana fasalulluka 16, kamar sanyaya iska, aikace-aikacen mota, da sifofin saka na musamman, waɗanda na iya zama mahimmanci ga wasu.guda uku mazugi rawar soja. Misalan ƙarin fasali sun haɗa da:

- A: sanyaya iska

- B: Na musamman shãfe haske bearings

- C: Cibiyoyin nozzles

- D: hakowa ta hanya

- E: Faɗakarwar nozzles

- G: Ƙarin kariyar ma'auni da kariyar jiki

- H: Aikace-aikace na tsaye da na jagora

- J: Nozzle diyya

- L: Ajiyayyen stabilizers

- M: Motoci aikace-aikace

- S: Daidaitaccen hakora masu niƙa

- T: Twin mazugi

- W: Ƙarfafa tsarin yankan

- X: Abubuwan da aka saka masu siffa

- Y: Abubuwan da aka saka

- Z: Sauran siffofi na abubuwan da aka saka

A lokuta inda atricone rotary drill bityana da ƙarin fasalulluka na tsari da yawa, an zaɓi fitaccen siffa da lambar haruffa ta wakilta. Waɗannan lambobin suna taimakawa gano haƙƙirawar soja don hako mai da iskar gasda kuma tabbatar da cewatricone bitya fi dacewa da ƙayyadaddun yanayin hakowa da tsarin da aka fuskanta.

Fahimtar wannan tsarin rarraba IDC yana da mahimmanci yayin zabar tsakaninSaka Haƙoran Haƙori(TCI bits) daMilled Tooth Tricone Bitsdomin ayyukan hakar rijiyoyi daban-daban, ko na rijiyoyin mai, ko filayen iskar gas, ko ayyukan hakar rijiyoyin ruwa.